Hot Water Heater Troubleshooting: Know What to Do

Hot water heater troubleshooting is an important step in determining the severity of your problem. When it comes to your hot water heater, sometimes the news is good and sometimes the news is catastrophic. If you don’t know what you’re looking for, you won’t have any idea of what kind of situation you are facing.

Let’s face it; most of us don’t pay any attention to our hot water heater until something goes wrong. When we first buy our house we get the temperature set where it’s not too hot and not too cold and unless something changes, we don’t even touch our water heater again.

One of the reasons why people start to pay attention to their water heater is that they hear a lot of noise. Thankfully, if you take care of this quickly, this is not a major problem. Properly flushing your hot water heater tank should eliminate the build up of sediment at the bottom of your tank that is the cause of the noises that you hear.

Not enough hot water, on the other hand, can be a little trickier to diagnose. A little detective work may be required to get to the bottom of this piece of hot water heater troubleshooting. Many hot water heaters share space with the laundry or furnace and it isn’t uncommon for the temperature setting to get bumped up or down while doing something else in this room. In this case, simply resetting your thermostat should take care of things.

Another cause of not enough hot water could be your expanding family. Your water heater reservoir should hold at least fifteen gallons per household member. As your kids grow up or other relatives move in, a water heater tank that used to be more than sufficient may leave you cold. In this case, you can be vigilant about staggering the family’s shower schedule or replace the unit for one with a proper capacity.

Calling in a licensed plumber will allow you to choose an energy efficient model that fits your needs that will be installed quickly and professionally according to local building codes.